CMMG .22 Conversion Kit with Magazine



New CMMG drop in .22 conversion kit with Black Dog Machine full body magazine. This model is semi automatic only.

All BDM Mags will have the bolt hold open follower included. When using the bolt hold open follower, magazine will only hold 26 rounds.

The PRI Gas Buster charging handle will not work with this .22 Conversion kit.

$200.
We now have extra Black Dog Machine full body magazines with the bolt hold open follower included. each magazine holds 26 rounds of 22LR.  Smoke Gray only.
$29.
__________________________________________
DPMS
Commercial
AP4 Carbine Stock Assembly
CS-AP4

Price $94.95
Description

New space age plastic, black matte finish. Built-in swivel. Price includes car buffer & spring. Only a screw driver and a spanner wrench or hammer and punch for lock ring is needed for installation.

Post Ban Stock is Pinned

6 Position locking

Aluminum Extension Tube

Rear slot for sling

 

                                                                                    

 

 

MagPul CTR Carbine Stock
 Commercial Version

 

CS-MAG311

$103.95

Description

The CTR is designed to be a drop in replacement carbine stock body. Adjustable for length of pull. This stock features a unique locking mechanism that friction locks the stock to the buffer tube for zero movement. 

Mounts on standard AR15 Commercial  carbine tubes. Commercial CTR includes spacer butt-pad.

Features:
• Friction locking system that eliminates all stock movement
• Sloping cheek weld for improved user interface
• Ambidextrous sling mounts for QD, 1.25" loops, and lanyard hole
• Side mounting slots for cheek risers
• Spacer butt-pad to allow for use with slanted-back commercial buffer tubes

Specifications:
• Weight: .0785 pounds without rubber butt-pad or spacer butt-pad
• Collapsed Length: 7.75" with included spacer butt-pad
• Extended Length: 11.05" with spacer included butt-pad 
                                                                    
DPMS

AR15 A2 butt stock Assembly

BS-10

Price $94.95
Description

AR15 A2 butt stock Assembly features the Aluminum Door Assembly w/plate and includes the tube, spacer, buffer, and buffer spring plus upper & lower screws.
                                                                     
CMMG
Mil. Spec.
AP4 Carbine Stock Assembly

 
Price: $125.00 

 Description

New space age plastic, black matte finish. Price includes car buffer & spring. Only a screw driver and a spanner wrench or hammer and punch for lock ring is needed for installation.

5 Position locking Aluminum Extension Tube Rear slot for sling.

 ________________________________________________

Vortex Striker Flash Hider


CMMG exclusive. CMMG has teamed up with Smith Enterprises to bring the all new Vortex Striker Flash Hider. The Vortex Striker delivers same flash elimination as before, with the added function of a carbide glass breaker and standoff device. BP-V-S

 

$122.

______________________________________________

NOVESKE KX3 (Flaming Pig)

5.56 $125. 
308 $149.

A Hard to get item, and these work great on AR SBR's, 14.5 Barrels if you want to permanently attach it, or 16 barrels if you are tired of your ears ringing from the standard flash hiders noise. 

_____________________________

                                  Rock River Lower Parts Kit

$85.
          ______________________         

                                       CMMG Lower Parts Kits

    

Lower Parts Kit for Ar15. Includes pistol grip, fire controls and pins necessary to complete stripped lower WASP coated. All part pictured are included.

$95.  
______________________

 
Lower Parts Kit
AR 15  $69.00

Includes the following lower receiver parts:

Pistol Grip, Trigger, Hammer, Disconnecter, Selector,  Bolt Catch Spring, Detent Spring, Bolt Catch Buffer, Take Down Detent, Bolt Catch, Magazine Catch Spring, Bolt Catch Roll Pin, Magazine Catch Button, Magazine Catch, Front Pivot Pin, Hammer Spring, Trigger Spring, Pistol Grip Screw, Pistol Grip Lock Washer, Selector Spring, Detent Selector, Hammer Pin, Trigger Pin, Take Down Pin, Buffer Retainer Pin, Buffer Retainer Spring & disconnecter Spring 

This kit comes with all the parts needed to build your AR 15 lower except, striped lower, butt stock and tools.  These are quality parts from DPMS Panther, the same quality parts used in other weapons like Bushmaster etc. They come in a plastic package with a diagram of how it all goes together on the back.
__________________________________

Black Rain Ordnance Milled Lower Receiver

MADE IN THE USA 100% CNC machined from a solid block of 7075 T6 billet aircraft grade aluminum. BLACK RAIN ORDNANCE, INC. uses only the highest quality of standards,
craftsmanship, and inspection phases to produce a totally awesome and custom milled lower
receiver. This lower receiver features:

Flared magazine well
Solid Winter trigger guard
Milled 3-D logo
Battle Grooves in opposing front
Mil-spec basic design to fit and function with any other manufacturers’ parts and accessories.
MULTI CAL, Pictograph Fire/Safe and Full Auto Designation for L.E. and S.O.T. use.
Made with a tough, tactical, appearance and finish, BLACK RAIN ORDNANCE, INC. uses hard coat grade III black anodizing with a Teflon impregnated finish.
Other colors are available upon request.
This will be a great look for your next build.  MSRP $339.  Our Price $279.
                                                                                                                                                                              

Black Rain Ordnance Milled Flat Top Upper Receiver 

This is one of the highest quality uppers on the market place hands down.  It is 100% CNC machined from a solid piece of 7075 t6 billet aircraft aluminum.  BLACK RAIN ORDNANCE, INC. ® uses only the highest quality of standards, craftsmanship, and inspection phases to produce a totally awesome and custom milled upper receiver.  This upper receiver features “blacked out” T marks as well as M4 feed ramps also of course using a mil-spec basic design to fit and function with any other manufacturers parts and accessories.  Made with a tough appearance as well as a tough finish BLACK RAIN ORDNANCE, INC. ® uses hard coat grade III black anodizing with a Teflon coated finish.  This will be a great look for your next build so be the first kid on your block to own one of the newest products on the market place today, you won’t be sorry shop and compare.  All stripped uppers must be assembled by a licensed gunsmith or AR-15/M16 Armorer.  MSRP $289.  Our Price $259.
                                                                                                                                                                        

Black Rain Ordnance Milled Charging Handle

Black Rain Ordnance charging handles are 100% cnc machined from a solid block of 7075 T-6 Billet.  Each charging handle is engraved with the words BLACK RAIN.  When coupled with a Black Rain upper receiver, the two come together to complete the biohazard logo that is engraved on the upper receiver.  A truly unique feature in the AR-15 industry.  Add to that the fact that all Black Rain charging handles are made in the USA and the engraving down the spine of the handle boasts that fact.  This charging handle has great features and will compliment any AR-15!  We clearly mark every piece that we make for a reason.  We believe in our products and want the consumer to know that if they purchase a Black Rain Ordnance part, they are getting the best quality available.
MSRP $48. Our Price $40.
                                                                                                                                                                


                                                                                         

 

 

 

 

Assembled Complete Lower,

 with Butt Stock Ready For Your Upper.
$325.

_______________
CMMG

                     CMMG Stripped Lower Receiver
 $160.




CMMG, Inc MOD4SA semi-auto AR15 stripped forged lower receiver. Lower is mil spec and uses standard take-down and fire control pins. Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum and is Teflon coated for added durability and color consistency. Receivers are RDIAS/RLL compatible.

________________________________________________

CMMG COMPLETE LOWER RECEIVER
with Mil. Spec. Butt Stock, all you need is your complete upper and your ready to go!

$350. 
___________________________________________________________
YHM
Yankee Hill Machine
Stripped AR15 Lower
$150.
                                                                                   

LAR Manufacturing
Grizzly AR-15 stripped Lower
 

   LAR Manufacturing, building the Grizzly AR-15 stripped lower, with over 30 years experience manufacturing, upper and lower receivers for the government and other well-known agencies around the world. Fully machined from forged 7075-T6 aircraft quality aluminum. Black anodized and baked with a Teflon coating.   These are the ones you want, do not settle for anything less.      

                                                    $145. each
        
           
           ___________________________________________ 

                      DPMS Panther .223/5.56
              Lower Receiver (Stripped) 

 Model: LR-05FF 

  Price: $150.
Sold out at this time
Description

• Forged from Aircraft Aluminum Alloy Tempered to T6 Condition
• Hardcoat Anodized per Mil-A-8625
• Teflon Coated Black
• Satisfaction Guaranteed

FFL Required for out-of-state purchase.                                     __________________________________________________   

     Rock River .223/5.56 Lower Receiver completed without butt stock.  
$299. 
                                                
DPMS 308 LR-05  Stripped Lower Receiver, and  DPMS  308 LR PK-308 Lower Receiver Parts Kit Package Deal  
$375.

 _____________________________________________________

 DPMS 16" chrome lined 1/9 twist A3 Flat Top BA-A3AS-16, UG-CH $526.96

DPMS 16" Chrome Molly 1/9 twist A2 sights BA-A2AS-16 $495.95

CMMG 16" M4 Chrome Lined 1/7 twist Flat Top Upper F Marked front sight base U-1604 $575.95

CMMG 16" M4 Chrome Lined 1/7 twist Flat Top Upper YHM Single Picatiatinny Gas Block U-1604, 1R750 $635.90

CMMG 16" M4 Gas Piston WASP Lined 1/9 twist Flat Top Upper, Free float Rail system $850.95

+


CMMG Complete 11.5 MedCon Chrome Lined Pistol Flat Top Upper U-115M $575.95


9mm Pistol Upper

CMMG Complete 7.3, 9mm Pistol 4140 WASP 1/10 Twist Carbine length handgard, no sights LEU-907 $649.95

CMMG Complete M7 9mm MedCon Pistol LEU-9M7 $649.95


Furniture Butt stock ACE Improved AR Pistol Kit ACE-ARP $95.


CMMG Stripped Lower $160.

CMMG Parts Kit $95.

Back by popular demand!

AR15 M4 Rifle kit minus the striped lower
$695.

New production AR15 16" M4 parts kit. The parts kit is manufactured by CMMG. The kit contains all parts necessary for a complete rifle less stripped lower receiver. Unlike most parts kits, this parts kit includes a sling, detachable carry handle and 30rd USGI mag

Barrel specs: 556 NATO 1/9 16" 4140 chrome molly barrel, With WASP coating on the inside and out side of the barrel.

16" M4 upper. Completely assembled, head spaced and test fired by CMMG, Fayette, Mo. USA Barrel specs: 556 NATO 1/9 16" 4140 chrome molly barrel with WASP coating on the inside and out side of the barrel. Deluxe 5 position butt stock with spring tube, and buffer. Rifle sling. Complete lower parts kit. Detachable carry handle. 30 Round USGI magazine.

 The upper has the famous new W.A.S.P. coating inside and out at no additional cost!

16" M4 AR15 CAR WASP lined Rifle kit less striped lower
CMMG – 5.56 NATO 1/9 twist, this is a parts kit that includes everything less the striped lower receiver. 16" Carbine upper is fully assembled, head spaced, and test fired. All front sights are "F" marked. $695.

 WASP coating is harder than chrome and provides greater durability. W.A.S.P., or Weapon Armored Surface Protection, is simply a modern alternative to chrome lining.
W.A.S.P. is a proprietary finish that provides the same durability and ruggedness as chrome lining, but at a fraction of the price. Additionally, W.A.S.P. not only protects the inside of the barrel, but the outside as well. Its matte black finish does not reflect.
CMMG WA.S.P. Corrosion resistance outperforms conventional chrome lining and provides, rugged reliability and durability essential to military grade firearms. 
                                                                                              

   All kits below, are sold out at this time. 

The kits below include all the parts you need to build a complete high quality M4 configuration, AR15 rifle except the striped lower. They are all as specified below unless noted otherwise in the rifle’s description.

All kits include: complete lower parts kite, removable carrying handle, 5.56 chambers, chrome or WASP lined, twist rate of 1/7 or 1/9 as stated below, staked bolt keys, 1 out of 100 QC testing has been performed on the bolts/barrels on the WASP lined and every 1 on the chrome lined, F marked on all forward sights, six position stocks on the WASP lined and 4 position stocks on the Chrome lined barrels, sling, 30 rd. mag.

16" HBAR MID LENGTH chrome lined Rifle kit less striped lower
CMMG – 5.56 NATO 1/9 twist, engraved barrel., this is a one time special parts kit that includes everything you would get with a thousand dollar CMMG rifle less the striped lower receiver. 16" HBAR upper is fully assembled, head spaced, and test fired. All front sights are "F" marked. $775.

16" HBAR CAR chrome lined Rifle kit less striped lower
CMMG – 5.56 NATO 1/9 twist, engraved barrel., this is a one time special parts kit that includes everything you would get with a thousand dollar CMMG rifle less the striped lower receiver. 16" HBAR Carbine upper is fully assembled, head spaced, and test fired. All front sights are "F" marked. $775.

16" Light Weight AR15 M4 MID Length chrome lined Rifle kit less striped lower CMMG – 5.56 NATO 1/7 twist, engraved barrel., this is a one time special parts kit that includes everything you would get with a thousand dollar CMMG rifle less the striped lower receiver. 16” Light Weight AR15 M4 MID LENGTH is fully assembled, head spaced, and test fired. All front sights are "F" marked. $775.

16" Light Weight CAR chrome lined Rifle kit less striped lower
CMMG – 5.56 NATO 1/7 twist, engraved barrel., this is a one time special parts kit that includes everything you would get with a thousand dollar CMMG rifle less the striped lower receiver. 16" Light Weight Carbine upper is fully assembled, head spaced, and test fired. All front sights are "F" marked. $775.

16" CAR chrome lined Rifle kit less striped lower
CMMG – 5.56 NATO 1/7 twist, engraved barrel., this is a one time special parts kit that includes everything you would get with a thousand dollar CMMG rifle less the striped lower receiver. 16" Carbine upper is fully assembled, head spaced, and test fired. All front sights are "F" marked. $775.

7.5” AR15 M4 configuration WASP lined Pistol Kit, Completely assembled upper, all parts are included in this kit to complete this pistol except for stripped lower. $825. (All ATF/NFA rules apply)

7.5” AR15 M4 configuration WASP lined Pistol Kit with quad rail, Completely assembled upper; all parts are included in this kit to complete this pistol except for stripped lower. $925.

(All ATF /NFA rules apply)

_____________________
DPMS 16" Lo-Pro 16 Complete Upper
$575.
                                                     
DPMS 16" Sportical Complete Upper
$575.
                                                     
DPMS 16" AP4A flat top Complete Upper
$675.
                                                    
 
CMMG 16” M4 Carbine Complete Upper 

 
$675.
CMMG 16 M4 Carbine complete upper. Features include mil-spec, standard M4 profile barrel, chrome lined 5.56mm chamber and bore, 1/7 twist, parkerizing under F marked forged front sight base, forged upper, M4 feed ramps, M4 hand guard caps, over-sized M4 hand guards. Stacked bolt and carrier. All barrels are magnetic particle tested and all uppers have been factory head spaced and test fired. 
                                                                                             

 CMMG 16" 6.8 Mid-Length Upper

$625.

New 16 6.8 mid-length upper. This upper comes with mid-length hand guards and is complete with bolt, carrier and charging handle. CMMG semi auto bolt carriers have the shrouded firing pin to protect against hammer wear. Upper receivers are T marked and include extended feed ramp cuts. Features include Government contour barrel, mid-length gas system, chrome lined 6.8 spec 2 chamber and bore, 1/10 twist, parkerizing under F marked forged front sight base and magnetic particle testing on every barrel. When ordering with optional gas block, barrels will not be drilled for taper pins. Barrel is marked CMMG MPC 6.8 1/10. Threaded 5/8x24. May be used with commercial Silver State Ammo. 

                                                          

AR-57 Upper Receiver  

$750.00

The new AR-57 Upper Receiver. This highly anticipated upper is a direct replacement for your standard AR upper that will allow you to shoot the FNH 5.7 round.

The AR-57 platform empowers the operator with 50 rounds of firepower while keeping the magazine out of the way, increasing maneuverability and speed in close quarters conflicts. In addition to it's compact, snag-free design, the spent shells are directed straight towards the floor by exiting the standard AR mag well.

The upper receiver and rails are precisely milled from a monolithic block of aircraft grade 7075 T6 aluminum. Any sighting systems mounted on the rails will stay zeroed through the toughest of missions.

Designed with reliability as its primary feature. There is no gas system to become clogged with carbon or fouling and maintenance is a snap. The bolt and chamber stay clean through extended shooting sessions.

This new offering defines "High speed, low drag".

Upper comes complete with bolt, and carrier assembly, and buffer.  (Magazine not included!)